Tungsten Disulfide Coating And The Properties On offer

Each piece of equipment or machine is subject to fiction that has an impact on its operational life. Fiction is known to have its impact in a couple of ways. The key is to apply tungsten disulfide coating in the right amount that will prevent any form of wear and tear beyond the permissible limits. Fiction is expected to increase the amount of the two surfaces in extreme environments on machine parts. It is known to be maintaining the optimum temperature of machine parts in such coatings.

These lubricants are termed as low fiction coatings and tungsten disulfide works out to be such a form of coating. At the same time, it is known to contribute to the better service life of the component. But before we go ahead there is a need to discover the benefits along with the features that you can expect from Tungsten Disulfide coating. At the same time, the application of the material is at an enormous level.

When it comes to the benefits of Tungsten disulfide coating a few of them are mentioned below

• The coefficient of fiction is on the lower side- the coating is expected to showcase a low level of coefficient of fiction that is 0.007 for dynamic and 0.003 when it comes to dynamic.

• Helps in any form of carbon build up- due to the low coefficient of fiction it prevents any form of carbon build-up that works out to be better than graphite, Teflon or MOS2.

• For extreme conditions it is well suited- the dry film coating is able to withstand temperatures to 100,000 PSI which is a capacity which would be equal to the substrate. This is known to have an operating temperate that may range in the bracket of 460 F to 1200 F.

• Service life improves- due to the WS2 coating it prevents any form of galling, seizing or components when it comes to machine parts. This is going to prevent any form of maintenance problems, downtime, excessive part replacement or be it any other issues.

• Easy application- the dry film coating is an easy one to apply and there is no form of bake-out or heat curing to be done. It is easy to apply them over the metal components, without any chemical agent or binder. It is not going to feel, a chip as it may go on to assimilate it into any form of substrate rather easily.

Some of the applications where Tungsten Disulfide coating leaves a mark are in bearings or any cam followers. Due to the above characteristics, it is considered to be popular as you need to understand the benefits of this application.